Source:NetHack 2.3e/mkmaze.c

From NetHackWiki
Revision as of 03:30, 4 March 2008 by Kernigh bot (talk | contribs) (NetHack 2.3e/mkmaze.c moved to Source:NetHack 2.3e/mkmaze.c: Robot: moved page)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Below is the full text to mkmaze.c from the source code of NetHack 2.3e. To link to a particular line, write [[NetHack 2.3e/mkmaze.c#line123]], for example.

Warning! This is the source code from an old release. For the latest release, see Source code

Screenshots and source code from Hack are used under the CWI license.

1.    /*	SCCS Id: @(#)mkmaze.c	2.3	88/03/31
2.    /* Copyright (c) Stichting Mathematisch Centrum, Amsterdam, 1985. */
3.    
4.    #include "hack.h"
5.    #include "mkroom.h"		/* not really used */
6.    extern struct monst *makemon(), *mkmon_at();
7.    extern struct permonst pm_wizard;
8.    extern struct obj *mkobj_at(), *mksobj_at();
9.    struct permonst hell_hound =
10.   	{ "hell hound", 'd', 12, 14, 2, 20, 3, 6, 0 };
11.   
12.   makemaz()
13.   {
14.   	int x,y;
15.   	register zx,zy;
16.   	coord mm;
17.   	boolean al = (dlevel >= 30 && !flags.made_amulet);
18.   
19.   	for(x = 2; x < COLNO-1; x++)
20.   		for(y = 2; y < ROWNO-1; y++)
21.   			levl[x][y].typ = (x%2 && y%2) ? 0 : HWALL;
22.   #ifndef RPH
23.   	if(al) {
24.   #else	/* make decoy wizard levels */
25.   	if((dlevel == u.wiz_level) ||
26.   	   (!rn2(3) && (dlevel > u.medusa_level+1))) {
27.   #endif
28.   	    register struct monst *mtmp;
29.   
30.   	    zx = 2*(COLNO/4) - 1;
31.   	    zy = 2*(ROWNO/4) - 1;
32.   	    for(x = zx-2; x < zx+4; x++) for(y = zy-2; y <= zy+2; y++) {
33.   		levl[x][y].typ =
34.   		    (y == zy-2 || y == zy+2 || x == zx-2 || x == zx+3) ? POOL :
35.   		    (y == zy-1 || y == zy+1 || x == zx-1 || x == zx+2) ? HWALL:
36.   		    ROOM;
37.   	    }
38.   #ifdef RPH
39.   	    if (dlevel == u.wiz_level) {
40.   #endif		
41.   		    (void) mkobj_at(AMULET_SYM, zx, zy);
42.   		    flags.made_amulet = 1;
43.   		    walkfrom(zx+4, zy);
44.   		    if(mtmp = makemon(&hell_hound, zx, zy))
45.   			mtmp->msleep = 1;
46.   		    if(mtmp = makemon(PM_WIZARD, zx+1, zy)) {
47.   			mtmp->msleep = 1;
48.   			flags.no_of_wizards = 1;
49.   		    }
50.   #ifdef RPH
51.   	    } else {
52.   		struct obj *ot;
53.   	    	/* make a cheap plastic imitation */
54.   	    	if (ot = mkobj_at(AMULET_SYM, zx, zy))
55.   		    ot-> spe = -1;
56.   		walkfrom(zx+4,zy);
57.   		if (mtmp = makemon(&hell_hound, zx, zy))
58.   		    mtmp->msleep = 1;
59.   		mkmon_at ('&', zx+1,zy);
60.   	    }
61.   #endif
62.   	} else {
63.   	    mazexy(&mm);
64.   	    zx = mm.x;
65.   	    zy = mm.y;
66.   	    walkfrom(zx,zy);
67.   #ifdef RPH
68.   	    if (!rn2(10) || (dlevel == u.medusa_level + 1))
69.   #endif
70.   		(void) mksobj_at(WAN_WISHING, zx, zy);
71.   	    (void) mkobj_at(ROCK_SYM, zx, zy);	/* put a rock on top of it */
72.   	}
73.   
74.   	for(x = 2; x < COLNO-1; x++)
75.   		for(y = 2; y < ROWNO-1; y++) {
76.   			switch(levl[x][y].typ) {
77.   			case HWALL:
78.   				levl[x][y].scrsym = HWALL_SYM;
79.   				break;
80.   			case ROOM:
81.   				levl[x][y].scrsym = ROOM_SYM;
82.   				break;
83.   			}
84.   		}
85.   	for(x = rn1(8,11); x; x--) {
86.   		mazexy(&mm);
87.   		(void) mkobj_at(rn2(2) ? GEM_SYM : 0, mm.x, mm.y);
88.   	}
89.   	for(x = rn1(10,2); x; x--) {
90.   		mazexy(&mm);
91.   		(void) mkobj_at(ROCK_SYM, mm.x, mm.y);
92.   	}
93.   	mazexy(&mm);
94.   	(void) makemon(PM_MINOTAUR, mm.x, mm.y);
95.   	for(x = rn1(5,7); x; x--) {
96.   		mazexy(&mm);
97.   		(void) makemon((struct permonst *) 0, mm.x, mm.y);
98.   	}
99.   	for(x = rn1(6,7); x; x--) {
100.  		mazexy(&mm);
101.  		mkgold(0L,mm.x,mm.y);
102.  	}
103.  	for(x = rn1(6,7); x; x--)
104.  		mktrap(0,1,(struct mkroom *) 0);
105.  	mazexy(&mm);
106.  	levl[(xupstair = mm.x)][(yupstair = mm.y)].scrsym = UP_SYM;
107.  	levl[xupstair][yupstair].typ = STAIRS;
108.  	xdnstair = ydnstair = 0;
109.  }
110.  
111.  #ifdef DGK
112.  /* Make the mazewalk iterative by faking a stack.  This is needed to
113.   * ensure the mazewalk is successful in the limited stack space of
114.   * the program.  This iterative version uses the mimumum amount of stack
115.   * that is totally safe.
116.   */
117.  walkfrom(x,y)
118.  int x,y;
119.  {
120.  #define CELLS (ROWNO * COLNO) / 4		/* a maze cell is 4 squares */
121.  	char mazex[CELLS + 1], mazey[CELLS + 1];	/* char's are OK */
122.  	int q, a, dir, pos;
123.  	int dirs[4];
124.  
125.  	pos = 1;
126.  	mazex[pos] = (char) x;
127.  	mazey[pos] = (char) y;
128.  	while (pos) {
129.  		x = (int) mazex[pos];
130.  		y = (int) mazey[pos];
131.  		levl[x][y].typ = ROOM;
132.  		q = 0;
133.  		for (a = 0; a < 4; a++)
134.  			if(okay(x, y, a)) dirs[q++]= a;
135.  		if (!q)
136.  			pos--;
137.  		else {
138.  			dir = dirs[rn2(q)];
139.  			move(&x, &y, dir);
140.  			levl[x][y].typ = ROOM;
141.  			move(&x, &y, dir);
142.  			pos++;
143.  			if (pos > CELLS)
144.  				panic("Overflow in walkfrom");
145.  			mazex[pos] = (char) x;
146.  			mazey[pos] = (char) y;
147.  		}
148.  	}
149.  }
150.  #else
151.  
152.  walkfrom(x,y) int x,y; {
153.  register int q,a,dir;
154.  int dirs[4];
155.  	levl[x][y].typ = ROOM;
156.  	while(1) {
157.  		q = 0;
158.  		for(a = 0; a < 4; a++)
159.  			if(okay(x,y,a)) dirs[q++]= a;
160.  		if(!q) return;
161.  		dir = dirs[rn2(q)];
162.  		move(&x,&y,dir);
163.  		levl[x][y].typ = ROOM;
164.  		move(&x,&y,dir);
165.  		walkfrom(x,y);
166.  	}
167.  }
168.  #endif /* DGK /**/
169.  
170.  move(x,y,dir)
171.  register int *x, *y;
172.  register int dir;
173.  {
174.  	switch(dir){
175.  		case 0: --(*y); break;
176.  		case 1: (*x)++; break;
177.  		case 2: (*y)++; break;
178.  		case 3: --(*x); break;
179.  	}
180.  }
181.  
182.  okay(x,y,dir)
183.  int x,y;
184.  register int dir;
185.  {
186.  	move(&x,&y,dir);
187.  	move(&x,&y,dir);
188.  	if(x<3 || y<3 || x>COLNO-3 || y>ROWNO-3 || levl[x][y].typ != 0)
189.  		return(0);
190.  	else
191.  		return(1);
192.  }
193.  
194.  mazexy(cc)
195.  coord	*cc;
196.  {
197.  	cc->x = 3 + 2*rn2(COLNO/2 - 2);
198.  	cc->y = 3 + 2*rn2(ROWNO/2 - 2);
199.  	return(0);
200.  }