Source:SLASH'EM 0.0.7E7F2/unixconf.h
Jump to navigation
Jump to search
Below is the full text to unixconf.h from the source code of SLASH'EM 0.0.7E7F2. To link to a particular line, write [[Source:SLASH'EM 0.0.7E7F2/unixconf.h#line123]], for example.
Source code for vanilla NetHack is at Source code.
The NetHack General Public License applies to screenshots, source code and other content from NetHack.
This content was modified from the original NetHack source code distribution (by splitting up NetHack content between wiki pages, and possibly further editing). See the page history for a list of who changed it, and on what dates.
1. /* SCCS Id: @(#)unixconf.h 3.4 1999/07/02 */ 2. /* Copyright (c) Stichting Mathematisch Centrum, Amsterdam, 1985. */ 3. /* NetHack may be freely redistributed. See license for details. */ 4. 5. #ifdef UNIX 6. #ifndef UNIXCONF_H 7. #define UNIXCONF_H 8. 9. 10. /* 11. * Some include files are in a different place under SYSV 12. * BSD SYSV 13. * <sys/time.h> <time.h> 14. * <sgtty.h> <termio.h> 15. * 16. * Some routines are called differently 17. * index strchr 18. * rindex strrchr 19. * 20. */ 21. 22. /* define exactly one of the following four choices */ 23. /* #define BSD 1 */ /* define for 4.n/Free/Open/Net BSD */ 24. /* also for relatives like SunOS 4.x, DG/UX, and */ 25. /* older versions of Linux */ 26. /* #define ULTRIX */ /* define for Ultrix v3.0 or higher (but not lower) */ 27. /* Use BSD for < v3.0 */ 28. /* "ULTRIX" not to be confused with "ultrix" */ 29. #define SYSV /* define for System V, Solaris 2.x, newer versions */ 30. /* of Linux */ 31. /* #define HPUX */ /* Hewlett-Packard's Unix, version 6.5 or higher */ 32. /* use SYSV for < v6.5 */ 33. 34. 35. /* define any of the following that are appropriate */ 36. #define SVR4 /* use in addition to SYSV for System V Release 4 */ 37. /* including Solaris 2+ */ 38. #define NETWORK /* if running on a networked system */ 39. /* e.g. Suns sharing a playground through NFS */ 40. /* #define SUNOS4 */ /* SunOS 4.x */ 41. /* #define LINUX */ /* Another Unix clone */ 42. /* #define CYGWIN32 */ /* Unix on Win32 -- use with case sensitive defines */ 43. /* #define GENIX */ /* Yet Another Unix Clone */ 44. /* #define HISX */ /* Bull Unix for XPS Machines */ 45. /* #define BOS */ /* Bull Open Software - Unix for DPX/2 Machines */ 46. /* #define UNIXPC */ /* use in addition to SYSV for AT&T 7300/3B1 */ 47. /* #define AIX_31 */ /* In AIX 3.1 (IBM RS/6000) use BSD ioctl's to gain 48. * job control (note that AIX is SYSV otherwise) 49. * Also define this for AIX 3.2 */ 50. 51. #define TERMINFO /* uses terminfo rather than termcap */ 52. /* Should be defined for most SYSV, SVR4 (including 53. * Solaris 2+), HPUX, and Linux systems. In 54. * particular, it should NOT be defined for the UNIXPC 55. * unless you remove the use of the shared library in 56. * the Makefile */ 57. #define TEXTCOLOR /* Use System V r3.2 terminfo color support */ 58. /* and/or ANSI color support on termcap systems */ 59. /* and/or X11 color */ 60. #define POSIX_JOB_CONTROL /* use System V / Solaris 2.x / POSIX job control */ 61. /* (e.g., VSUSP) */ 62. #define POSIX_TYPES /* use POSIX types for system calls and termios */ 63. /* Define for many recent OS releases, including 64. * those with specific defines (since types are 65. * changing toward the standard from earlier chaos). 66. * For example, platforms using the GNU libraries, 67. * Linux, Solaris 2.x 68. */ 69. 70. /* #define OPENWINBUG */ /* avoid a problem using OpenWindows 3.0 for 71. X11 on SunOS 4.1.x, x>= 2. Do not define 72. for other X11 implementations. */ 73. /* #define PYRAMID_BUG */ /* avoid a bug on the Pyramid */ 74. /* #define BSD_43_BUG */ /* for real 4.3BSD cc's without schain botch fix */ 75. /* #define MICROPORT_BUG */ /* problems with large arrays in structs */ 76. /* #define MICROPORT_286_BUG */ /* changes needed in termcap.c to get it to 77. run with Microport Sys V/AT version 2.4. 78. By Jay Maynard */ 79. /* #define AIXPS_2BUG */ /* avoid a problem with little_to_big() optimization */ 80. 81. /* #define RANDOM */ /* if neither random/srandom nor lrand48/srand48 82. is available from your system */ 83. 84. /* see sys/unix/snd86unx.shr for more information on these */ 85. /* #define UNIX386MUSIC */ /* play real music through speaker on systems 86. with music driver installed */ 87. /* #define VPIX_MUSIC */ /* play real music through speaker on systems 88. with built-in VPIX support */ 89. 90. /* 91. * ALI 92. * 93. * File areas can be used to place different Slash'EM files in different 94. * directories. This is necessary to comply with Linux's FSSTD 1.2 and its 95. * replacement FHS 2.0. Currently, these are only implemented for UNIX, but 96. * other ports could follow suit by including similar defines in their port 97. * specific config files and implementing the relevent functions. 98. * 99. * File areas are supposed to be opaque; that is the core system does not 100. * interpret them in any way, it simply passes them to the port specific 101. * functions to handle. This means that while the obvious mapping is onto 102. * directories, there is nothing in the core code that assumes this. Non-UNIX 103. * ports in particular may find that a more general mapping is desirable. 104. * 105. * The following file areas are supported: 106. * 107. * FILE_AREA_SAVE For save files (R/W) 108. * FILE_AREA_BONES For bones files (R/W) 109. * FILE_AREA_LEVL For level files (R/W) 110. * FILE_AREA_VAR For other files which may be modified by Slash'EM 111. * FILE_AREA_SHARE For read-only, architechure independent, files 112. * FILE_AREA_UNSHARE For read-only, architechure dependent, files 113. * FILE_AREA_DOC For human-readable documentation 114. */ 115. 116. /* #define FILE_AREAS */ /* Use file areas */ 117. 118. #ifdef FILE_AREAS 119. 120. /* 121. * File areas compatible with Linux's FSSTND 1.2. 122. * Note: This has been superceeded by FHS 2.0, but is included because 123. * many systems still seem to use it. 124. */ 125. 126. /* #define FILE_AREA_VAR "/var/lib/games/slashem/" */ 127. /* #define FILE_AREA_SAVE "/var/lib/games/slashem/save/" */ 128. /* #define FILE_AREA_SHARE "/usr/lib/games/slashem/" */ 129. /* #define FILE_AREA_UNSHARE "/usr/lib/games/slashem/" */ 130. /* #define FILE_AREA_DOC "/usr/doc/slashem/" */ 131. 132. /* 133. * File areas compatible with FHS 2.0 134. */ 135. 136. #define FILE_AREA_VAR "/var/games/slashem/" 137. #define FILE_AREA_SAVE "/var/games/slashem/save/" 138. #define FILE_AREA_SHARE "/usr/share/games/slashem/" 139. #define FILE_AREA_UNSHARE "/usr/lib/games/slashem/" 140. #define FILE_AREA_DOC "/usr/share/doc/slashem/" 141. 142. #define FILE_AREA_BONES FILE_AREA_VAR 143. #define FILE_AREA_LEVL FILE_AREA_VAR 144. 145. #endif /* FILE_AREAS */ 146. 147. /* 148. * The next two defines are intended mainly for the Andrew File System, 149. * which does not allow hard links. If NO_FILE_LINKS is defined, lock files 150. * will be created in LOCKDIR using open() instead of in the playground using 151. * link(). 152. * Ralf Brown, 7/26/89 (from v2.3 hack of 10/10/88) 153. */ 154. 155. /* #define NO_FILE_LINKS */ /* if no hard links */ 156. 157. #ifdef NO_FILE_LINKS 158. # ifdef FILE_AREAS 159. # define LOCKDIR FILE_AREA_VAR /* where to put locks */ 160. # else 161. # define LOCKDIR "/usr/games/lib/nethackdir" /* where to put locks */ 162. # endif 163. #endif 164. 165. /* 166. * Define DEF_PAGER as your default pager, e.g. "/bin/cat" or "/usr/ucb/more" 167. * If defined, it can be overridden by the environment variable PAGER. 168. * Hack will use its internal pager if DEF_PAGER is not defined. 169. * (This might be preferable for security reasons.) 170. * #define DEF_PAGER ".../mydir/mypager" 171. */ 172. 173. /* 174. * If you want the static parts of your playground on a read-only file 175. * system, define VAR_PLAYGROUND to be where the variable parts are kept. 176. */ 177. /* #define VAR_PLAYGROUND "/var/lib/games/nethack" */ 178. 179. 180. 181. /* 182. * Define PORT_HELP to be the name of the port-specfic help file. 183. * This file is found in HACKDIR. 184. * Normally, you shouldn't need to change this. 185. * There is currently no port-specific help for Unix systems. 186. */ 187. /* #define PORT_HELP "Unixhelp" */ 188. 189. #ifdef TTY_GRAPHICS 190. /* 191. * To enable the `timed_delay' option for using a timer rather than extra 192. * screen output when pausing for display effect. Requires that `msleep' 193. * function be available (with time argument specified in milliseconds). 194. * Various output devices can produce wildly varying delays when the 195. * "extra output" method is used, but not all systems provide access to 196. * a fine-grained timer. 197. */ 198. /* #define TIMED_DELAY */ /* usleep() */ 199. 200. # ifdef TEXTCOLOR 201. # define VIDEOSHADES 202. # endif 203. #endif 204. 205. /* 206. * If you define MAIL, then the player will be notified of new mail 207. * when it arrives. If you also define DEF_MAILREADER then this will 208. * be the default mail reader, and can be overridden by the environment 209. * variable MAILREADER; otherwise an internal pager will be used. 210. * A stat system call is done on the mailbox every MAILCKFREQ moves. 211. */ 212. 213. #define MAIL /* Deliver mail during the game */ 214. 215. /* The Andrew Message System does mail a little differently from normal 216. * UNIX. Mail is deposited in the user's own directory in ~/Mailbox 217. * (another directory). MAILBOX is the element that will be added on to 218. * the user's home directory path to generate the Mailbox path - just in 219. * case other Andrew sites do it differently from CMU. 220. * 221. * dan lovinger 222. * dl2n+@andrew.cmu.edu (dec 19 1989) 223. */ 224. 225. /* #define AMS */ /* use Andrew message system for mail */ 226. 227. /* NO_MAILREADER is for kerberos authenticating filesystems where it is 228. * essentially impossible to securely exec child processes, like mail 229. * readers, when the game is running under a special token. 230. * 231. * dan 232. */ 233. 234. /* #define NO_MAILREADER */ /* have mail daemon just tell player of mail */ 235. 236. #ifdef MAIL 237. # if defined(BSD) || defined(ULTRIX) 238. # ifdef AMS 239. #define AMS_MAILBOX "/Mailbox" 240. # else 241. # if defined(__FreeBSD__) || defined(__OpenBSD__) 242. #define DEF_MAILREADER "/usr/bin/mail" 243. # else 244. #define DEF_MAILREADER "/usr/ucb/Mail" 245. # endif 246. # endif 247. #else 248. # if (defined(SYSV) || defined(DGUX) || defined(HPUX)) && !defined(LINUX) 249. # if defined(M_XENIX) 250. #define DEF_MAILREADER "/usr/bin/mail" 251. # else 252. # ifdef __sgi 253. #define DEF_MAILREADER "/usr/sbin/Mail" 254. # else 255. #define DEF_MAILREADER "/usr/bin/mailx" 256. # endif 257. # endif 258. # else 259. #define DEF_MAILREADER "/bin/mail" 260. # endif 261. #endif 262. 263. #define MAILCKFREQ 50 264. #endif /* MAIL */ 265. 266. 267. 268. #ifdef COMPRESS 269. /* Some implementations of compress need a 'quiet' option. 270. * If you've got one of these versions, put -q here. 271. * You can also include any other strange options your compress needs. 272. * If you have a normal compress, just leave it commented out. 273. */ 274. /* #define COMPRESS_OPTIONS "-q" */ 275. #endif 276. 277. #define FCMASK 0660 /* file creation mask */ 278. 279. 280. /* 281. * The remainder of the file should not need to be changed. 282. */ 283. 284. #ifdef _AUX_SOURCE 285. # ifdef AUX /* gcc ? */ 286. # define _SYSV_SOURCE 287. # define _BSD_SOURCE 288. #else 289. # define AUX 290. # endif 291. #endif /* _AUX_SOURCE */ 292. 293. #if defined(LINUX) || defined(bsdi) 294. # ifndef POSIX_TYPES 295. # define POSIX_TYPES 296. # endif 297. # ifndef POSIX_JOB_CONTROL 298. # define POSIX_JOB_CONTROL 299. # endif 300. #endif 301. 302. /* 303. * BSD/ULTRIX systems are normally the only ones that can suspend processes. 304. * Suspending NetHack processes cleanly should be easy to add to other systems 305. * that have SIGTSTP in the Berkeley sense. Currently the only such systems 306. * known to work are HPUX and AIX 3.1; other systems will probably require 307. * tweaks to unixtty.c and ioctl.c. 308. * 309. * POSIX defines a slightly different type of job control, which should be 310. * equivalent for NetHack's purposes. POSIX_JOB_CONTROL should work on 311. * various recent SYSV versions (with possibly tweaks to unixtty.c again). 312. */ 313. #ifndef POSIX_JOB_CONTROL 314. # if defined(BSD) || defined(ULTRIX) || defined(HPUX) || defined(AIX_31) 315. # define BSD_JOB_CONTROL 316. # else 317. # if defined(SVR4) 318. # define POSIX_JOB_CONTROL 319. # endif 320. # endif 321. #endif 322. #if defined(BSD_JOB_CONTROL) || defined(POSIX_JOB_CONTROL) || defined(AUX) 323. #define SUSPEND /* let ^Z suspend the game */ 324. #endif 325. 326. 327. #if defined(BSD) || defined(ULTRIX) 328. #include <sys/time.h> 329. #else 330. #include <time.h> 331. #endif 332. 333. #define HLOCK "perm" /* an empty file used for locking purposes */ 334. #define HLOCK_AREA FILE_AREA_VAR 335. 336. #ifndef REDO 337. #define Getchar nhgetch 338. #endif 339. #define tgetch getchar 340. 341. #define SHELL /* do not delete the '!' command */ 342. 343. /* -AJA- Escaping to a shell doesn't work when SDL port is running 344. * fullscreen (makes the computer seem frozen). Undefining 345. * `SHELL' is a bit blunt though... 346. */ 347. #if defined(GL_GRAPHICS) || defined(SDL_GRAPHICS) 348. #undef SHELL 349. #endif 350. 351. #include "system.h" 352. 353. #if defined(POSIX_TYPES) || defined(__GNUC__) 354. #include <stdlib.h> 355. #include <unistd.h> 356. #endif 357. 358. #if defined(POSIX_TYPES) || defined(__GNUC__) || defined(BSD) || defined(ULTRIX) 359. #include <sys/wait.h> 360. #endif 361. 362. #if defined(BSD) || defined(ULTRIX) 363. # if !defined(DGUX) && !defined(SUNOS4) 364. #define memcpy(d, s, n) bcopy(s, d, n) 365. #define memcmp(s1, s2, n) bcmp(s2, s1, n) 366. # endif 367. # ifdef SUNOS4 368. #include <memory.h> 369. # endif 370. #else /* therefore SYSV */ 371. # ifndef index /* some systems seem to do this for you */ 372. #define index strchr 373. # endif 374. # ifndef rindex 375. #define rindex strrchr 376. # endif 377. #endif 378. 379. /* Use the high quality random number routines. */ 380. #if defined(BSD) || defined(LINUX) || defined(ULTRIX) || defined(CYGWIN32) || defined(RANDOM) 381. #define Rand() random() 382. #else 383. #define Rand() lrand48() 384. #endif 385. 386. #ifdef TIMED_DELAY 387. # if defined(SUNOS4) || defined(LINUX) || defined(SVR4) /* [max] added SVR4 */ 388. # define msleep(k) usleep((k)*1000) 389. # endif 390. # ifdef ULTRIX 391. # define msleep(k) napms(k) 392. # endif 393. #endif 394. 395. #ifdef hc /* older versions of the MetaWare High-C compiler define this */ 396. # ifdef __HC__ 397. # undef __HC__ 398. # endif 399. # define __HC__ hc 400. # undef hc 401. #endif 402. 403. #if defined(GNOME_GRAPHICS) 404. #if defined(LINUX) 405. # include <linux/unistd.h> 406. # if defined(__NR_getresuid) && defined(__NR_getresgid) /* ie., >= v2.1.44 */ 407. # define GETRES_SUPPORT 408. # endif 409. #else 410. # if defined(BSD) || defined(SVR4) 411. /* 412. * [ALI] We assume that SVR4 means we can safely include syscall.h 413. * (although it's really a BSDism). This is certainly true for Solaris 2.5, 414. * Solaris 7, Solaris 8 and Compaq Tru64 5.1 415. * Later BSD systems will have the getresid system calls. 416. */ 417. # include <sys/syscall.h> 418. # if (defined (SYS_getuid) || defined(SYS_getresuid)) && \ 419. (defined(SYS_getgid) || defined(SYS_getresgid)) 420. # define GETRES_SUPPORT 421. # endif 422. # endif /* BSD || SVR4 */ 423. #endif /* LINUX */ 424. #endif /* GNOME_GRAPHICS */ 425. 426. #if defined(USE_REGEX_MATCH) 427. # if defined(__FreeBSD__) || defined(__OpenBSD__) 428. # define POSIX_REGEX 429. # else 430. # define GNU_REGEX 431. # endif 432. #endif 433. 434. #endif /* UNIXCONF_H */ 435. #endif /* UNIX */